PRODUCT DETAIL
W11SNC-20x3000 Plate Bending Machine
Paramefers

W11SNC-20x3000 Plate Bending Machine

roll bending machine

W11SNC 3-roller Plate Bending Machine is a kind of double pinch plate bending machine. The top roller is hydraulic driving. The top roller is vertically and horizontally adjustable, and the two lower rollers are fixed. All of the rollers in alloyed steel are induction hardening and heat treatment. All of the rollers will be grinded and polished after induction hardening treatment.

Parameters

W11SNC-20x3000

Rated Pressing Force from Upper Roller

Ton

190

Working temperature

 

At natural temperature

Plate yield limit

MPa

245

Max.

Thk. of bending plate

(mm)

20

Thk. of pre-bending

16

Width of bending plate

                       3000

Min. rolling dia. with max.size

(mm)

1000

Diameter of Roller

Upper

mm

400

Bottom

mm

220

Working

Rollers

Material

42CrMo

Hardness

(HB)

260-300

Induction Hardened Roll

YES

Roll Profile

crown

Lifting Mode

hydraulic

Central distance of bottom rollers

mm

360

Diameter of supporting roller

mm

-

Adjusting way of supporting rollers

 

motorized

Rolling speed

m/min

3.5

Upper roller descending speed

mm/min

120

Upper roller ascending speed

mm/min

200

Upper roller supporting way

 

Self aligning roller bearing

Bottom roller driving way

 

motor + reducer + breaker

Upper roller horizontal moving way

 

motor+ warm gear

Upper roller horizontal moving speeding

mm/min

100

Upper roller Synchronous Precise/Accuracy

±(mm)

≤0.20

Upper roller moving precise/accuracy

±(mm)

≤0.20

Upper roller re-position precise/accuracy

±(mm)

≤0.20

Upper roller action control

PLC + transducers

Conical Bending Device

YES

Power character

380V/50Hz/3phase

Control System

Control way

PLC control + moving controller

Display of position & displacement

LCD

PLC

OMRON

Electrical Part System

SIEMNENS

Main Power Motor

(KW)

22

Motor for hydraulic

(KW)

7.5

Motor for horizontal moving

(KW)

4

Hydraulic System

Max. Working Pressure

(MPa)

19.5

Valve

YUKEN

Seal

VALQUE

Electrical & Hydraulic Protection Againts Overload

YES

Construction Steel Material

Q235

Side Support for Big Sheet Metal Diameters

optional

Central Support for Big sheet Metal Diameters

optional

Feeding Table

optional

Oil Cooler System

optional

 

Features

▲electronic parallelism control system

▲rollers synchronization and balancing control fully electronically controlled

▲top roller hydraulic driving, can be vertically and horizontally adjustable.

▲anti-friction material in sliding area

▲instantaneous brake for rollers rotation for high safety

▲reversal side hydraulic driving

▲Mobile control panel station, with low voltage control

▲Mobile control push-buttons, convenience for operator

Components
Picfures

plate bending machine

 

Send Inquiry
Your email address will not be published. Required fields are marked *
  • Name:*
  • Email:*
  • Phone:*
  • Company Name:
  • Comments:*
    Note:HTML is not translated!
TELEMAILSMSWHATSAPP