WE67K-400/4000 CNC Hydraulic Press Brake
Parameters:
|
1 |
Nominal pressure |
4000 |
KN |
|
|
2 |
Bending width |
4000 |
mm |
|
|
3 |
Distance between uprights |
3100 |
mm |
|
|
4 |
Stroke |
250 |
mm |
|
|
5 |
Max. opening height |
520 |
mm |
|
|
6 |
Throat depth |
400 |
mm |
|
|
7 |
Working table length |
4000 |
mm |
|
|
8 |
Approaching speed |
60 |
mm/s |
|
|
9 |
Bending speed |
6.5 |
mm/s |
|
|
10 |
Returning speed |
60 |
mm/s |
|
|
11 |
Main motor power |
30 |
KW |
|
|
12 |
Oil pump |
50 |
mr/r |
|
|
13 |
Back gauge range |
600 |
mm |
|
|
14 |
Machine length |
4100 |
mm |
|
|
15 |
Machine width |
2000 |
mm |
Without front feeder |
|
16 |
Machine height |
3430 |
mm |
|
|
17 |
CNC axis |
Y1-Y2-X +V |
Main machine |
|
▲ highly productive, accurate, and economical.
▲close loop proportional hydraulics for beam synchronization
▲highly Precise proportional valve to control accurate beam movement
▲ front operated manual back gauge with micro-adjustment.
▲ accurate & fine beam position control by micro limit switch.
▲ hydraulic cylinder with twin type sealing low & high pressure and hard chrome.
▲ three speeds shit automatically
▲the current position and set position of the Y1, Y2, X, are showed on the CNC controller LCD.
▲three types operation way: manual, semiautomatic and automatic
▲CNC controlled mechanical pulling-rod anti-crowing device
▲light encoder to avoid the deflection bending
▲language choice on CNC control system
▲liner motion bearings and AC servo drive for accurate position up to 0.05 mm.
--DA5-53T CNC controller
--Cylinder
--Back gauge ( X axis)
--Automatic crowning table
--Punch & die
--Lineal scale
--Optional of back gauge (X-R axes)
--Optional of punch
CNC press brake, hydraulic press brake, plate bending machine, hydraulic bender, bending machine, electric-hydraulic synchronous, Y1-Y2-X axis
-
-
Name:*
-
Email:*
-
Phone:*
-
Company Name:
-
Comments:*Note:HTML is not translated!