WE67K-400/3200 CNC Hydraulic Press Brake
Parameters:
|
1 |
Nominal pressure |
4000 |
KN |
|
|
2 |
Bending width |
3200 |
mm |
|
|
3 |
Distance between uprights |
2600 |
mm |
|
|
4 |
Stroke |
250 |
mm |
|
|
5 |
Max. opening height |
520 |
mm |
|
|
6 |
Throat depth |
400 |
mm |
|
|
7 |
Working table length |
3200 |
mm |
|
|
8 |
Approaching speed |
60 |
mm/s |
|
|
9 |
Bending speed |
6.5 |
mm/s |
|
|
10 |
Returning speed |
60 |
mm/s |
|
|
11 |
Main motor power |
30 |
KW |
|
|
12 |
Oil pump |
50 |
mr/r |
|
|
13 |
Back gauge range |
600 |
mm |
|
|
14 |
Machine length |
3300 |
mm |
|
|
15 |
Machine width |
2000 |
mm |
Without front feeder |
|
16 |
Machine height |
3230 |
mm |
|
|
17 |
CNC axis |
Y1-Y2-X +V |
Main machine |
|
▲ highly productive, accurate, and economical.
▲close loop proportional hydraulics for beam synchronization
▲highly Precise proportional valve to control accurate beam movement
▲ front operated manual back gauge with micro-adjustment.
▲ accurate & fine beam position control by micro limit switch.
▲ hydraulic cylinder with twin type sealing low & high pressure and hard chrome.
▲moving control panel with on/off controls, emergency push button
▲ three speeds shit automatically
▲the current position and set position of the Y1, Y2, X, are showed on the CNC controller LCD.
▲three types operation way: manual, semiautomatic and automatic
▲CNC controlled mechanical pulling-rod anti-crowing device
▲light encoder to avoid the deflection bending
▲language choice on CNC control system
REXROTH valve
CNC crowning table
Punch & die
Back gauge
DA-52S CNC controller
CNC press brake, hydraulic press brake, plate bending machine, hydraulic bender, bending machine, electric-hydraulic synchronous, Y1-Y2-X axis
-
-
Name:*
-
Email:*
-
Phone:*
-
Company Name:
-
Comments:*Note:HTML is not translated!