WE67K-200/2500  CNC Press brake

Parameters and character

1	Nominal pressure	2000	KN
2	Bending width	3200	mm
3	Distance between uprights	2050	mm
4	Stroke	200	mm
5	Max. daylight	435	mm
6	Throat depth	320	mm
7	Working table length	2500	mm
8	Approaching speed	100	mm/s
9	Bending speed	80	mm/s
10	Returning speed	80	mm/s
11	Main motor power	15	KW
12	Oil pump	25	mr/r
13	Back gauge range	600	mm
14	Machine length	2700	mm
15	Machine width	1650	mm	Without front feeder
16	Machine height	2850	mm
17	CNC axis	Y1-Y2-X -R+V

--Features

▲ highly productive, accurate, and economical.

▲close loop proportional hydraulics for beam synchronization

▲REXROTH highly precise proportional valve to control accurate beam movement

▲High alloy back gauge, with high rigidity in light heavy

▲ accurate & fine beam position control by micro limit switch.

▲ hydraulic cylinder with twin type sealing low & high pressure and hard chrome.

▲moving control panel with on/off controls, emergency push button &selector for inching,

▲ three speeds shit automatically

▲the current position and set position of the Y1, Y2, X, R are showed on the CNC controller LCD.

▲three types operation way: manual, semiautomatic and automatic

▲CNC controlled mechanical pulling-rod anti-crowing device(V)

▲FAGOR/GIV liean scale to avoid the deflection bending

▲DA52S CNC control system

▲liner motion bearings and AC servo drive for accurate position up to 0.05 mm.

Instruction of structure

--Hydraulic Manifold Control Block  

                                                              

--Main mechanical structure

 

DA52S CNC controller

Back gauge ( X-R axes)

 

--Stop finger

 

GIVI lineal scale 

CNC controlled mechanical pulling-rod anti-crowing device

--Punch and Multi-V die

Optional choice:

                                                                                                                                                                    Different types punch

   

                                                                                                

                                                                                                                                                                       Anti-friction lower die

   

Main components

1	Main electric components	SIEMENS & Schneider or OMRON
2	Main motor	SIEMENS BEIDE
3	Oil pump	SUNNY
4	Valve	REXROTH
5	Seal	Parker
6	CNC controller	DELEM—DA-53T
7	Synchronous control	DELEM
8	Lineal scale	FAGOR/GIVI
9	Linder guider	TBI/HEQING
10	Ball screw	TBI/HEQING
11	Servo driver	ESTUN/INOVANCE

CNC press brake, hydraulic press brake, plate bending machine, hydraulic bender, bending machine, electric-hydraulic synchronous, Y1-Y2-X axis