WE67KS- 170/3200 CNC Servo Press brake

Parameters

Model	Rated Force (mm)	Bending Length (mm)	Distance of Uprights (mm)	Daylight (mm)	Throat Depth  (mm)	Beam Stroke (mm)	Motor Power (KW)	Dimenssions    （L x W x H）
WE67KS-40T1200	40T	1100	800	465	300	150	2X3	1400X1280X2380
WE67KS-60T1600	60T	1600	1250	465	300	150	2X3	1500X1320X2400
WE67KS-80T1800	80T	1800	1400	465	320	150	2X3	2100X1340X2420
WE67KS-80T2000	80T	2000	1600	465	320	150	2X3	2800X1360X2440
WE67KS-100T2500	100T	2500	2050	500	320	200	2X4.4	2800X1380X2460
WE67KS-100T3200	100T	3200	2600	500	320	200	2X4.4	3500X1400X2480
WE67KS-100T4000	100T	4000	3200	500	320	200	2X4.4	4300X1420X2520
WE67KS-130T2500	130T	2500	2050	500	350	200	2X4.4	2800X1400X2480
WE67KS-130T3200	130T	3200	2600	500	350	200	2X4.4	3500X1420X2550
WE67KS-130T4000	130T	4000	3200	500	350	200	2X4.4	4300X1450X2600
WE67KS-170T2500	170T	2500	2050	500	400	200	2X5.5	2800X1550X2550
WE67KS-170T3200	170T	3200	2600	500	400	200	2X5.5	3500X1600X2650
WE67KS-170T4000	170T	4000	3200	500	400	200	2X5.5	4300X1650X2800
WE67KS-200T2500	200T	2500	2050	500	400	200	2X5.5	2800X1600X2600
WE67KS-200T3200	200T	3200	2600	500	400	200	2X5.5	3500X1650X2700
WE67KS-200T4000	200T	4000	3200	500	400	200	2X5.5	4300X1700X2900

Features

▲60%-70% energy consumption

▲ 30% oil consummation

▲moving control panel with on/off controls, emergency push button &selector for inching,

▲High alloy back gauge, with high rigidity in light heavy

▲4+1 axis

▲CNC controlled mechanical pulling-rod anti-crowing device(V)

▲FAGOR linear scale to avoid the deflection bending

▲DA53T CNC control system

▲liner motion bearings and AC servo drive for accurate position up to 0.05 mm.

Instruction of structure

--Dual servo pump + motor

 

The servo motor doesn’t rotate when the press brake does not work; The servo motor is rotating during the bending and returning period, and the energy consumption is 60%-70%  compare to the traditional press brake.

The hydraulic unit that connected to the cylinder directly, each hydraulic unit contains one servo motor and one oil container, the oil consummation is 30% of the oil that used in traditional press brake. It has the quickly action response, which let the beam move fast to  improve the efficiency.

--CNC control system

The control system is DELEM D series professional press brake CNC control system, touch screen, 2D or 3D graphic.

--CNC crowning system

The mechanical wedge crowning device is placing under the lower die, using professional reducer and precision potentiometer to control the accuracy.

-- X-R back gauge

The back gauge is equipped with ball screw and linear rail. The functions of the back gauge can be extended up to 6 axis ((X1,X2,R1,R2,Z1,Z2).

-- Linear scale

Two pieces of linear scale were installed at the uprights to supply the reliable position and re-position accuracy.

-- Quick clamping system

Quick clamping system,the operator can change the tool through our quick clamping system.

--Moveable support

The front sheet support can move against the linear rail, fast and reliable.

--Tool

The machine is equipped with 1-V/2-V die. We also supply the customed tool.

#CNC, #pressbrake, #CNCpressbrake,#hydrid, #servopump,#servomotor