WC67Y-63/2000 Hydraulic Press Brake

WC67Y-63/2000 Hydraulic Press Brakes is specially designed for bend the short length work piece. They are accurate, and economical. Through advanced design and construction,

Features

-- Special designed for bend thin plate at short length, most economic and lower consumption.

--Fast approach & fast return speeds to save cycle time

--International quality hydraulics components.

--Front operated manual back gauge with micro-adjustment.

--Accurate & fine beam position control by micro limit switch.

--Hydraulic cylinder with twin type sealing low & high pressure and hard chrome.

--Moving control panel with on/off controls,

--emergency push button

--selector for inching, single stroke & continuous stroke mode for easy operation & safety.

Parameter

1	Nominal pressure	630	KN
2	Bending width	2000	mm
3	Distance between uprights	1550	mm
4	Stroke	120	mm
5	Max. daylight	350	mm
6	Throat depth	250	mm
7	Working table length	2500	mm
8	Approaching speed	80	mm/s
9	Bending speed	8	mm/s
10	Returning speed	80	mm/s
11	Main motor power	5.5	KW
12	Machine length	2100	mm
13	Machine width	1400	mm
14	Machine height	1950	mm

Structures in detal

--E21 controller

--Punch & die

--Mechanical torsion bar

--Tool hold

--Back gauge

--Stop finger

--Optional Choice

--S10 NC controller