WC67Y-40/2500 Hydraulic Press Brake
WC67Y-40/2500 Hydraulic Press Brakes is specially designed for bend the short length work piece. They are accurate, and economical. Through advanced design and construction,
Features
-- Special designed for bend thin plate at short length, most economic and lower consumption.
--Fast approach & fast return speeds to save cycle time
--International quality hydraulics components.
--Front operated manual back gauge with micro-adjustment.
--Accurate & fine beam position control by micro limit switch.
--Hydraulic cylinder with twin type sealing low & high pressure and hard chrome.
--Moving control panel with on/off controls,
--emergency push button
--selector for inching, single stroke & continuous stroke mode for easy operation & safety.
Features
| Rated force (KN) | 400 |
| Max. bendig length (mm) | 2500 |
| Distance between uprights (mm) | 2050 |
| Throat depth (mm) | 200 |
| Beam stroke length (mm) | 120 |
| Max. daylight (mm) | 310 |
| Main motor power (mm) | 4 |
Structures in detal
--E21 controller
--Punch & die
--Optional Choice
--S10 NC controller
--pucn & die
-
-
Name:*
-
Email:*
-
Phone:*
-
Company Name:
-
Comments:*Note:HTML is not translated!