W12NC-20x2000 Four Rollers Plate Bending Machine

W12NC 4-roller Plate Bending Machine is a type of double pinch plate bending machine. Each of the rollers is separate driven. Rollers rectilinear slide ways coated with antifriction material, no maintenance, suit to heavy duty loading, smooth and stable positioning. Spherical roller bearings are equipped on the rollers. All of the rollers in alloyed steel are induction hardening and heat treatment. All of the rollers will be grinded and polished after induction hardening treatment.

Parameter

Specification
Max.	Thk. of bending plate	(mm)		20
	Thk. of pre-bending			16
	Width of bending plate			2000
Effective length of the rollers		(mm)		2100
Yield Strength of Plate		(MPa)		235
Min. reel dia. with max.size		(mm)		550
Diameter of Roller	Upper	(mm)		320
	Bottom			300
	Side			260
Roller	Material			42CrMo
	Hardness	(HB)		220-260
	Induction Hardened Roll			YES
	Roll Profile			crown
	Lifting Mode			hydraulic
Lifting Synchronous Precise/Accuracy			±(mm)	0.2
All Bearing Brand				Self aligning roller bearing
Conical Bending Device				YES
Driving Mode				Motor + reducer
Control System	Control Mode			NC
	Display of position & displacement			LCD
	PLC			SIEMENS
Electrical Part System				SIEMNENS
Plate Bending Speed		(m/min)		about 3.5
Descending/Ascending Speed of bottom roller		(mm/min)		About 160
Descending/Ascending Speed of side roller		(mm/min)		About 300
Hydraulic System	Max. Working Pressure	(MPa)		22
	Valve			YUKEN
	Seal			VALQUE
Electrical & Hydraulic Protection Againts Overload				YES
Construction Steel Material				Q235
Side Support for Big Sheet Metal Diameters				optional
Central Support for Big sheet Metal Diameters				optional
Feeding Table				optional
Oil Cooler System				optional

Features:

--heady duty linear sliding guides mounted on the uprights of the machine for lower roller and side rollers translation

--electronic parallelism control system

--rollers synchronization and balancing control fully electronically controlled

--side rollers and bottom rollers variable tilting controlled, positive or negative

--conical facility

--rollers driving by independent hydraulic motors

--anti-friction material in sliding area

--instantaneous brake for rollers rotation for high safety

--reversal side hydraulic driving

--Mobile control panel station, with low voltage control

--Mobile control push-buttons, convenience for operator

--Rollers

--SIMENS PLC

-- Hydraulic system

--Frame

--Cylinders

--Cone bending

Optional:

--vertical plate supporting device

--side plate supporting device

--Application