W12NC-20x1000 Four Rollers Plate Bending Machine
W12NC-20x1000 is a 4-roller Plate Bending Machine is a type of double pinch plate bending machine. Each of the rollers is separate driven. Rollers rectilinear slide ways coated with antifriction material, no maintenance, suit to heavy duty loading, smooth and stable positioning. Spherical roller bearings are equipped on the rollers. All of the rollers in alloyed steel are induction hardening and heat treatment. All of the rollers will be grinded and polished after induction hardening treatment.
Parameter
|
Specification |
||||
|
Max. |
Thk. of bending plate |
(mm) |
20 |
|
|
Thk. of pre-bending |
16 |
|||
|
Width of bending plate |
1000 |
|||
|
Effective length of the rollers |
(mm) |
1100 |
||
|
Yield Strength of Plate |
(MPa) |
235 |
||
|
Min. reel dia. with max.size |
(mm) |
|
||
|
Diameter of Roller |
Upper |
(mm) |
|
|
|
Bottom |
|
|||
|
Side |
|
|||
|
Roller |
Material |
42CrMo |
||
|
Hardness |
(HB) |
220-260 |
||
|
Induction Hardened Roll |
YES |
|||
|
Roll Profile |
crown |
|||
|
Lifting Mode |
hydraulic |
|||
|
Lifting Synchronous Precise/Accuracy |
±(mm) |
0.2 |
||
|
All Bearing Brand |
Self aligning roller bearing |
|||
|
Conical Bending Device |
YES |
|||
|
Driving Mode |
Motor + reducer |
|||
|
Control System |
Control Mode |
NC |
||
|
Display of position & displacement |
LCD |
|||
|
PLC |
SIEMENS |
|||
|
Electrical Part System |
SIEMNENS |
|||
|
Plate Bending Speed |
(m/min) |
about 3.5 |
||
|
Descending/Ascending Speed of bottom roller |
(mm/min) |
About 160 |
||
|
Descending/Ascending Speed of side roller |
(mm/min) |
About 300 |
||
|
Hydraulic System |
Max. Working Pressure |
(MPa) |
0 |
|
|
Valve |
SOFIAMA/YUKEN |
|||
|
Seal |
VALQUE |
|||
|
Electrical & Hydraulic Protection Againts Overload |
YES |
|||
Features:
--heady duty linear sliding guides mounted on the uprights of the machine for lower roller and side rollers translation
--electronic parallelism control system
--rollers synchronization and balancing control fully electronically controlled
--upper roller is hydraulic motor driven
--conical facility (optional)
--anti-friction material in sliding area
--instantaneous brake for rollers rotation for high safety
--reversal side hydraulic driving
--Mobile control panel station, with low voltage control
--Hydraulic motor
--ALIEN S650 control system
-- Hydraulic system
--Cylinders
--Cone bending(Optional)
--Application
-
-
Name:*
-
Email:*
-
Phone:*
-
Company Name:
-
Comments:*Note:HTML is not translated!