W12NC-12x1500 Four Rollers Plate Bending Machine

W12NC-12x1500 4-roller Plate Bending Machine is a type of double pinch plate bending machine. Each of the rollers is separate driven. Rollers rectilinear slide ways coated with antifriction material, no maintenance, suit to heavy duty loading, smooth and stable positioning. Spherical roller bearings are equipped on the rollers. All of the rollers in alloyed steel are induction hardening and heat treatment. All of the rollers will be grinded and polished after induction hardening treatment.

Parameters

Specification
Max.	Thk. of bending plate	(mm)		12
	Thk. of pre-bending			10
	Width of bending plate			1500
Effective length of the rollers		(mm)		1600
Yield Strength of Plate		(MPa)		235
Min. reel dia. with max.size		(mm)		500
Diameter of Roller	Upper	(mm)		220
	Bottom			200
	Side			180
Upper roller	Material			42CrMo
	Hardness	(HB)		240-286
	Induction Hardened Roll			YES
	Roll Profile			crown
	Lifting Mode			hydraulic
Lifting Synchronous Precise/Accuracy			±(mm)	0.2
All Bearing Brand				Self aligning roller bearing
Conical Bending Device				Optioanl
Driving Mode				Hydraulic motor
Control System	Control Mode			CNC
	Display of position & displacement			LCD
	PLC			XINJIE/OMRON/SIEMENS
Electrical Part System				SIEMNENS/ABB/SHNEIDER
Plate Bending Speed		(m/min)		about 3.5
Descending/Ascending Speed of bottom roller		(mm/min)		About 160
Descending/Ascending Speed of side roller		(mm/min)		About 260
Main Power Motor		(KW)		11
Hydraulic System	Max. Working Pressure	(MPa)		25
	Valve			SOFIMA/YUKEN
	Seal			VALQUE
Electrical & Hydraulic Protection Againts Overload				YES
Side Support for Big Sheet Metal Diameters				optional
Central Support for Big sheet Metal Diameters				optional
Feeding Table				optional
Oil Cooler System				optiona

Features:

--heady duty linear sliding guides mounted on the uprights of the machine for lower roller and side rollers translation

--electronic parallelism control system

--rollers synchronization and balancing control fully electronically controlled

--side rollers and bottom rollers variable tilting controlled, positive or negative

--conical facility

--rollers driving by independent hydraulic motors

--anti-friction material in sliding area

--instantaneous brake for rollers rotation for high safety

--reversal side hydraulic driving

--Mobile control panel station, with low voltage control

--Mobile control push-buttons, convenience for operator

--Rollers

--Hydraulic motor

--Control system

-- Hydraulic system

--Cylinders

--Cone bending

Optional:

--vertical plate supporting device

--side plate supporting device

--Application

 

 

 

 

 

Optional:

--vertical plate supporting device

--side plate supporting device