PRODUCT DETAIL
YS1 Series H-frame Single Crank Press
Paramefers

YS1 Series H-frame Single Crank Press

H-frame presses refer to a kind of hydraulic presses in which the frame resembles the shape of the letter "H". Hydraulic press is a machine tool for processing materials by pumping fluid, which is some special hydraulic oil, in the slave cylinder with pressure. The hydraulic presses are widely used in industrial and mechanical field.

Hydraulic presses, which are commonly used for mechanical work, have a simple and compact design. The maximum force of different machine models can be from 5 to 100 tons. But for the most popular single crank hydraulic press is with a force of 10-20 tons. This is usually enough for the repair of the vehicle.

YSA1 is stoke adjustable press, YS1L is link drive press

Below are some properties of this single crank hydraulic press:

1. Closed type integral welding body, eliminating the press angle deformation; phenomenon, Improve the processing precision and extend the service life of die;

2. Eight side guide rail slider, long and high precision, stable running and high precision. Dry pneumatic friction clutch, low noise, convenient maintenance;

3. Hydraulic overload protection device, automatic emergency stop, press and die protection safety, easy to use;

4. Automatic oil lubrication system, having a circuit alarm function, to ensure that the machines are running smoothly;

5. Die height automatic control, digital display device, convenient in mold adjustment;

6. PLC electric centralized control, with emergency stop, inching, single, continuous operation specification;

7. Optional photoelectric protection, a drive output shaft, automatic feeding, and air cushion device.

YS1 Series H-frame Single Crank Press

Model YS1-80 YS1L-80 YSIA-80 YS1-125 YS1L-125 YS1A-125 YS1-160 YS1L-160 YS1A-160 YS1-200 YS1L-200 YS1A-200 YS1-250 YS1L-250 YS1A-250 YS1-315 YS1L-315 YS1A-315 YS1-400 YS1L-400 YS1-500 YS1-630 YS1-800
Nominal pressure KN 800 1250 1600 2000 2500 3150 4000 5000 6300 8000
Nominal pressure stroke mm 4 5 6 6 7 8 8 10 13 13
Slide stroke mm 140 12.5-120 160 18.6-150 180 16.5-160 200 18.7-180 220 21-220 250 26-250 250 250 250 300
Strokes S.P.M 40-75 45-65 35-55 30-50 30-45 25-40 25-35 20-30 15-20 15
Max. die set height mm 320 370 400 450 500 550 550 550 550 600
Die height adjustment mm 80 90 100 110 110 120 120 120 120 120
Distance between uprights mm 840 1040 1140 1240 1340 1440 1440 1540 1800 2120
Dimension of slide hole(F-B) mm 500 600 600 650 700 750 800 900 1000 1000
Bottom size of slide L-R mm 700 900 1000 1100 1200 1300 1300 1400 1400 1700
F-B mm 500 600 600 650 700 750 800 800 1200 1200
Hole for punch shank Dimension mm Φ50 Φ60 Φ70 Φ70 Φ70 Φ70 Φ70 Φ70 Φ70 Φ70
Depth mm 60 80 80 80 80 80 80 100 100 100
Size of table L-R mm 800 1000 1100 1200 1300 1400 1400 1500 1700 1800
F-B mm 550 630 650 800 900 900 1000 1000 1300 1300
Thickness mm 90 150 180 200 200 200 220 220 220 240
Size of opening in table Dimension mm Φ150 Φ160 Φ Φ180 Φ200 Φ250 Φ250 Φ250 Φ250 Φ250
Main motor power KW 7.5 15 15 22 30 37 37 55 75 75
Components
Picfures
Send Inquiry
Your email address will not be published. Required fields are marked *
  • Name:*
  • Email:*
  • Phone:*
  • Company Name:
  • Comments:*
    Note:HTML is not translated!
TELEMAILSMSWHATSAPP