YC1 Series Single-crank Press Machine - SINOBENDER INDUSTRIAL CO.,LTD

Paramefers

YC1 Series Single-crank Press Machine

--Main Structure Features

1.Main Structure：This series Press was composed of steel-welded frame, driving, clutch, brake, slide, air pipes, lubrication system, electrical system etc.. This structure was compact and good appearance.

2． Steel welded frame, with aging effect, can ensure the machine high rigidity and less deformation.

3．C-Frame structure, with steady precision, can improve the stamping precision and die serving life.

4. Longitudinal Crank Shaft, short distance between two supporting spot and high rigidity, compact and suitable structure. The gear drives in the oil, with low noise and less abrasive.

5. Pneumatic dry combination friction clutch-brake, mechanical interlock, security and credibility, good stability, low noise and long serving life.

6. Import hydraulic overload protection device, response rapid, working stability, outside oil tank, maintain easily.

7. Six-side long rectangle guides of the slide with high moving precision and high accuracy.

8. Automatic grease lubrication, with Progressive Grease Distributor and alarm system, was controlled by PLC system.

9. Automatic die adjustment device, digital monitor display, high precision achieve +0.1mm.

10.PLC electrical control system allow various auto-equipment reprogrammed according to different requirements and perform various functions, to ensure high reliability and high adaptability. Emergent stop,I nching, single and continuous movement.

11．Three connection parts of air system adopt SMC brand.

YC1 Series Single-crank Press Machine

Specification

Model			YC1-25		YC1-45		YC1-60		YC1-80		YC1-110		YC1-125		YC1-160		YC1-200		YC1-250

			V	H	V	H	V	H	V	H	V	H	V	H	V	H	V	H	V	H
Nominal pressure		KN	250		450		600		800		1100		1250		1600		2000		2500
Nominal pressure stroke		mm	3.2	2.3	3.2	2.3	4	2.3	5	3.2	5	3.2	5	3.2	6	4	6	4	6	4
Slide stroke		mm	80	30	110	50	130	50	150	60	180	70	180	70	200	80	200	100	250	100
Strokes	Varible	S.P.M	70-110	95-190	50-95	85-175	40-85	80-160	40-75	70-140	30-60	60-120	30-60	60-120	25-55	50-100	20-50	45-80	20-45	40-70
	Fixed	S.P.M	75	135	65	125	60	120	60	100	50	90	50	90	45	80	35	60	30	55
Max. die set height		mm	230	255	270	300	300	340	330	375	350	405	370	425	400	460	450	500	450	525
Die height adjustment		mm	50		60		70		80		90		90		100		110		120
Throat depth		mm	170		230		270		310		350		370		390		420		430
Slider area	LxWxT	mm	350x300x50		430x350x60		500x400x70		560x460x70		650x520x80		700x560x80		700x580x90		850x650x90		920x700x100
Bolster area	LxwxT	mm	720x320x70		850x440x80		900x520x90		1000x600x100		1150x680x110		1200x720x120		1260x760x140		1400x820x160		1550x840x180
Hole for punch shank	Diameter	mm	Φ38.1		Φ38.1		Φ50		Φ50		Φ50		Φ50		Φ65		Φ65		Φ65
Main motor powr		KW xP	3x4		4x4		4x4		5.5x4		7.5x4		11x4		15x4		15x4		18.5x4
Slider adjusting device		KW xP	manual		manual		0.3x4		0.4x4		0.75x4		0.75x4		1.1x4		1.1x4		1.1x4
Air pressure		kg/cm3	6		6		6		6		6		6		6		6		6
Height of bolster surface		mm	800		800		800		830		845		845		1020		1020		1120
Capacity of die cushion		Ton	/		2.6		3.6		6.3		8		8		10		10		14
Stroke of die cushion		mm	/		60		70		70		80		80		100		100		100
Effective are of die cushion		mm	/		300x250		350x300		450x310		500x350		500x350		660x460		660x460		660x460
Overall dimensions	F-B	mm	832		860		970		1180		1305		1385		1575		1575		1740
	L-R	mm	1060		1350		1390		1755		1935		2010		2300		2300		2345
	Height	mm	2165		2375		2585		2685		2915		3020		3675		3675		4000
Weight		Kg	1900		3700		5400		6300		9500		10500		14200		19000		26000

Components

Picfures