QC12Y-10x2500  Hydraulic Swing Beam Shearing Machine

PARAMETERS:

Model(QC12Y)	10x2500
Shearing thickness (mm)	10
Shearing width (mm)	2500
Cutting plate tensile strength N/mm²	450
Shearing  angle (°)	1.5
Back gauge range (mm)	20-600
Blade length (mm)	2520
Throat depth (mm)	80
Blade material	6CrW2Si
Main motor power (KW)	15
Stroke (n/min)	10
Length (mm)	3200
Width (mm)	1550
Height (mm)	1650

--Features

▲  swing beam design

▲  Better cutting accuracy in thin sheets at lower rake angle.

▲  Higher cutting capacity at maximum rake angle.

▲  Low noise & smooth operation gives higher efficiency of operator.

▲  Less power consumption.

▲  Better safety for operator and machine.

▲  Front sheet support.

▲  Squaring arm with steel rule for front gauging.

▲  Hardened Transfer bars mounted on table.

▲  Hold down cylinders.

▲  Foot pedal with emergency stop

▲  Four edge 6CrWi2Si Blade suitable to MS & SS.

▲  Hardened & ground ball screw with linear motion bearings.

▲  Stroke counting on screen.

--Blade Gap Adjustment

--Swing Beam Design

--Modern Block Hydraulics

--Front-Controlled Power Back Gauge

--E21s controller

-- Pipe  connection 

shearing machine, cutting, swing beam shearing machine, hydraulic shearing machine, shearer